All Parts

Immersion heater used used in 125E, OEM P/N 480LWD4500 4500W (4.5kW) 480V (240V also available, see EZ Industrial parts store) 1" NPT brass screw ...

Strip heater used for non-contact heating of evaporator.  EZ-Vap PN 2013537 and drop-in replacement for 85-001 strip heater used in WE 85E.   1.9k...

This kit includes the EZ-Vap Auto-Fill controls, high level safety switch, auto-fill toggle switch and contactor, 50 gpm self-priming centrifugal f...

Includes thermostat, knob, bezel and capillary bulb adapter sleeve.  Temp range: 85-230F +/- 7.2F 120VAC 20 Amps Approvals: UL, C-UL, CE, ENEC Cap...

Immersion heater used used in 125E, OEM P/N 240LWD4500 4500W (4.5kW) 240V (480V also available, see EZ Industrial parts store) 1" NPT brass screw ...

Rigid CPVC wand with 90 degree elbow to 20' x 1" flexible PVC vacuum rated hose. Comes pre-assembled with quick disconnect cam and groove coupling ...

Burner used on EZ-Vap Models EZV-G12, EZV-G25, EZV-G40.  Also used on WE 120G, 240G, 375G.  200,000 - 400,000 BTU/hour 120VAC/60 Hz Natural Gas or...

This Exhaust Fan is a 1/4 HP, 1725 RPM draft inducer used on the EZV-E12, G12, G25 and EMC 125E, 120G, and 240G.  See photos for dimensional drawin...

Low water level micro switch.  OEM P/N WE205 or 2013624.

Low water level actuator assembly. OEM P/N WE215-20 Includes: 20" low level float/cable assembly sized for 125E, 120G, 240G, 375G Switch toggle pl...

Heater wiring harness for 85E.  OEM P/N 85-002.  Compatible with 240V-1PH, 240V-3PH and 480V-3PH 85E systems.  12' of wire provided, cut to length ...

Fill pump motor, 1/2 HP, 1 phase.  OEM P/N SFP332-1 Open Drip-proof Face Mounting 1/2 HP 3,450 RPM 115/230V AC

Better known in the field as the Blue Angel burner, the HSG400 remains one of the most widely used power burners around the world in its firing ran...

Off-Cycle Damper Kit for HSG-400 burner WE 100371-KIT

High level backup float switch used to lock out fill pump should evaporator liquid level get too high.  OEM P/N WE108.  EZ-Vap P/N 2013694 Read eva...

Low water level actuator assembly for the EZ-Vap EZV-G40 evaporator.

This kit includes the EZ-Vap Auto-Fill controls, high level safety switch, auto-fill toggle switch and contactor.   If ordered with an EZ-Vap evapo...

Circuit breaker, 2 Pole, 4 Amp, 240VAC  

 Contactor, 3 Pole, 16 Amp, 120VAC Coil  

Heat start momentary toggle switch used on EZ-Vap wastewater evaporators and Water Eater evaporators as both the heat start toggle switch and the f...

This kit includes the EZ-Vap 50 gpm self-priming centrifugal feed/cleanout pump, pump run pushbutton, feed/cleanout piping, and manual 3-way manual...

Contactor with AUX switch.  P?N:  WE204-AUX 3 Pole contactor, 40/50 Amp, 120VAC Coil   

 Contactor, 3 Pole, 40/50 Amp, 120VAC Coil.  WE204.  

Digital combustion flue gas analyzer. Capable of providing readings on CO, CO2, and O2 of flue gases. Includes analyzer, sampling probe, filter/wat...