EZ-Vap Parts

Burner used on EZ-Vap Models EZV-G12, EZV-G25, EZV-G40.  Also compatible with EMC WaterEater 120G, 240G, 375G.  200,000 - 400,000 BTU/hour 120VAC/...

5 gallon pail of defoamer.  Can be added to evaporator feed line automatically via the EZ Industrial anti-foam injection system or manually added t...

This Exhaust Fan is a 3/4 HP, 1725 RPM draft inducer used on the EZV-G40.  Also compatible with the EMC WaterEater 375G.  See images for dimensiona...

This Exhaust Fan is a 1/4 HP, 1725 RPM draft inducer used on the EZV-E12, E24, G15, and G25.  Also compatible with EMC WaterEater125E, 120G, and 24...

This Exhaust Fan is a 1/25 HP, 1550 RPM draft inducer used on the EZV-E4 and ENCON DE-4, DE-2 drum evaporator.  See photos for dimensional drawing....

Strip heater used for non-contact heating of evaporator.  EZ-Vap electric evaporator PN 2013537. Compatible with the EMC WaterEater model 85E.  Dro...

Digital combustion flue gas analyzer. Capable of providing readings on CO, CO2, and O2 of flue gases. Includes analyzer, sampling probe, filter/wat...

This 50 gpm self-priming centrifugal pump is used to fill an evaporator from a nearby feed tank or pit.  This is the feed pump supplied with an EZ-...

This 50 gpm, 3450 RPM, 3ph self-priming centrifugal pump is used to fill an evaporator from a nearby feed tank or pit.  This is the feed pump suppl...

High level backup float switch used to lock out fill pump should evaporator liquid level get too high. EZ-Vap P/N 2013694.  Also compatible with EM...

This kit includes the EZ-Vap Auto-Fill controls, high level safety switch, auto-fill toggle switch and contactor, 50 gpm self-priming centrifugal f...

Low water level micro switch.   Compatible with EMC WaterEater models 85E, 125E, 120G, 240G, 375G.  Replacement for EMC P/N WE205. EZ-Vap P/N 20136...

Off-Cycle Damper Kit for HSG-400 burner Wayne Combustion P/N: 100371-KIT Compatible with EZ-Vap evaporator models G15, G25, G40 Compatible with EMC...

Primary Air Damper for HSG-400 burner Compatible with EZ-Vap evaporator models G15, G25, G40 Compatible with EMC WaterEater models 120G, 240G, 375G...

Burner blower motor, 3450 RPM, for HSG-400 burner. Compatible with EZ-Vap evaporator models G15, G25, G40 Compatible with EMC WaterEater models 120...

Burner air pressure switch for HSG-400 burner.  Wayne Combustion P/N 63263-005. Compatible with EZ-Vap evaporator models G15, G25, G40 Compatible w...

Burner 24 Volt transformer 120V, for HSG-400 burner WE 60186-004 Compatible with EZ-Vap evaporator models G15, G25, G40 Compatible with EMC WaterEa...

Burner ignition transformer for HSG-400 burner WE 62407-001 Compatible with EZ-Vap evaporator models G15, G25, G40 Compatible with EMC WaterEater m...

Burner electrode assembly for HSG-400 burner Compatible with EZ-Vap evaporator models G15, G25, G40 Compatible with EMC WaterEater models 120G, 240...

Burner igniter support parts kit for HSG-400 burner Compatible with EZ-Vap evaporator models G15, G25, G40 Compatible with EMC WaterEater models 12...

Burner flame sensor assembly for HSG-400 burner.  aka Flame Sensor Probe Compatible with EZ-Vap evaporator models G15, G25, G40 Compatible replacem...

Honeywell burner controller for HSG-400 Compatible with EZ-Vap models G15, G25, and G40. Compatible with EMC WaterEater models 120G, 240G, 375G rep...

Burner orifice housing kit for HSG-400 burner.  Wayne Combustion P/N 62402-KIT. Compatible with EZ-Vap models G15, G25, G40 Compatible replacement ...

3/4" x 3/4" inlet/outlet, Direct Ignition, Intermittent Pilot, Slow Opening, Natural Gas Valve Replacement Compatible with EZ-Vap models G15, G25, ...