EZ Industrial Equipment

This Exhaust Fan is a 1/25 HP, 1550 RPM draft inducer.  MOTOR SPECS 115V-1PH 60 Hz 1550 RPM 1/25 HP 0.43 Amps

Diaphragm gas volume meter:  425,000 BTU/hr maximum  max pressure 10 PSIG Connections:  1.25" 

This Exhaust Fan is a 1/25 HP, 1550 RPM draft inducer used on the EZV-E4, EMC 85E, and ENCON DE-4, DE-2 drum evaporator.  See photos for dimensiona...

Gas valve for HSG-400 burner

Digital combustion flue gas analyzer. Capable of providing readings on CO, CO2, and O2 of flue gases. Includes analyzer, sampling probe, filter/wat...

2001954 | Transformer | 240/480 x120/240, 1KVA, 1PH

The feed isolation valve is designed to prevent the wastewater from gravity draining into the evaporator should the holding tank level exceed the e...

Brass ball valve, 3-way, 1" FNPT 

Strip heater used for non-contact heating of evaporator.  EZ-Vap PN 2013537 and drop-in replacement for 85-001 strip heater used in WE 85E.   1.9k...

Low water level micro switch.  OEM P/N WE205 or 2013624.

Heat start momentary toggle switch used on EZ-Vap wastewater evaporators and Water Eater evaporators as both the heat start toggle switch and the f...

Includes thermostat, knob, bezel and capillary bulb adapter sleeve.  Temp range: 85-230F +/- 7.2F 120VAC 20 Amps Approvals: UL, C-UL, CE, ENEC

Time delay relay, .02 sec - 300 hrs, 120VAC/24VDC

This 50 gpm self-priming centrifugal pump is used to fill an evaporator from a nearby feed tank or pit.  This is the feed pump supplied with an EZ-...

This 50 gpm, 3450 RPM, 3ph self-priming centrifugal pump is used to fill an evaporator from a nearby feed tank or pit.  This is the feed pump suppl...

Immersion heater used used in 125E, OEM P/N 240LWD4500 4500W (4.5kW) 240V (480V also available, see EZ Industrial parts store) 1" NPT brass screw ...

High level backup float switch used to lock out fill pump should evaporator liquid level get too high.  OEM P/N WE108.  EZ-Vap P/N 2013694 Read eva...

Immersion heater used used in 125E, OEM P/N 480LWD4500 4500W (4.5kW) 480V (240V also available, see EZ Industrial parts store) 1" NPT brass screw ...

Better known in the field as the Blue Angel burner, the HSG400 remains one of the most widely used power burners around the world in its firing ran...

 Contactor, 3 Pole, 16 Amp, 120VAC Coil  

Circuit breaker, 2 Pole, 4 Amp, 240VAC  

This Exhaust Fan is a 1/4 HP, 1725 RPM draft inducer used on the EZV-E12, G12, G25 and EMC 125E, 120G, and 240G.  See photos for dimensional drawin...

This Exhaust Fan is a 3/4 HP, 1725 RPM draft inducer used on the EZV-EG40 and EMC 375G.  See photos for dimensional drawing.  MOTOR SPECS 115V-1PH...

Circuit breaker, 2 Pole, 6 Amp, 240VAC