All Store Items

Immersion heater used used in 125E, OEM P/N 480LWD4500 4500W (4.5kW) 480V (240V also available, see EZ Industrial parts store) 1" NPT brass screw ...

Immersion heater used used in 125E, OEM P/N 240LWD4500 4500W (4.5kW) 240V (480V also available, see EZ Industrial parts store) 1" NPT brass screw ...

Strip heater used for non-contact heating of evaporator.  EZ-Vap PN 2013537 and drop-in replacement for 85-001 strip heater used in WE 85E.   1.9k...

This Exhaust Fan is a 1/4 HP, 1725 RPM draft inducer used on the EZV-E12, G12, G25 and EMC 125E, 120G, and 240G.  See photos for dimensional drawin...

This Exhaust Fan is a 1/25 HP, 1550 RPM draft inducer used on the EZV-E4, EMC 85E, and ENCON DE-4, DE-2 drum evaporator.  See photos for dimensiona...

This Exhaust Fan is a 3/4 HP, 1725 RPM draft inducer used on the EZV-EG40 and EMC 375G.  See photos for dimensional drawing.  MOTOR SPECS 115V-1PH...

5 gallon pail of defoamer.  Can be added to evaporator feed line automatically via the EZ Industrial anti-foam injection system or manually added t...

Burner used on EZ-Vap Models EZV-G12, EZV-G25, EZV-G40.  Also used on WE 120G, 240G, 375G.  200,000 - 400,000 BTU/hour 120VAC/60 Hz Natural Gas or...

Fill pump motor, 1/2 HP, 1 phase.  OEM P/N SFP332-1 Open Drip-proof Face Mounting 1/2 HP 3,450 RPM 115/230V AC

Digital combustion flue gas analyzer. Capable of providing readings on CO, CO2, and O2 of flue gases. Includes analyzer, sampling probe, filter/wat...

This 50 gpm self-priming centrifugal pump is used to fill an evaporator from a nearby feed tank or pit.  This is the feed pump supplied with an EZ-...

This 50 gpm, 3450 RPM, 3ph self-priming centrifugal pump is used to fill an evaporator from a nearby feed tank or pit.  This is the feed pump suppl...

High level backup float switch used to lock out fill pump should evaporator liquid level get too high.  OEM P/N WE108.  EZ-Vap P/N 2013694 Read eva...

This Exhaust Fan is a 1/25 HP, 1550 RPM draft inducer.  MOTOR SPECS 115V-1PH 60 Hz 1550 RPM 1/25 HP 0.43 Amps

Low water level actuator assembly. OEM P/N WE215-27 Includes: 27" low level float/cable assembly sized for 85E Switch toggle plate Fully assembled...

Low water level actuator assembly. OEM P/N WE215-20 Includes: 20" low level float/cable assembly sized for 125E, 120G, 240G, 375G Switch toggle pl...

This kit includes the EZ-Vap Auto-Fill controls, high level safety switch, auto-fill toggle switch and contactor, 50 gpm self-priming centrifugal f...

Low water level micro switch.  OEM P/N WE205 or 2013624.

Heater wiring harness for 85E.  OEM P/N 85-002.  Compatible with 240V-1PH, 240V-3PH and 480V-3PH 85E systems.  12' of wire provided, cut to length ...

Includes thermostat, knob, bezel and capillary bulb adapter sleeve.  Temp range: 85-230F +/- 7.2F 120VAC 20 Amps Approvals: UL, C-UL, CE, ENEC Cap...

Heater shutdown delay relay for WE auto-fill system.    

 Contactor, 3 Pole, 40/50 Amp, 120VAC Coil.  WE204.  

Combination Foot Valve, Suction Hose Strainer.  PN: WE-SDH-FV

Off-Cycle Damper Kit for HSG-400 burner WE 100371-KIT